Looking for doors

The Swap Meet - Buy , Sell ,Wanted ,Trade ,Ebay ,etc.

Moderator: F9K9

Looking for doors

Postby dchs51 » Mon Dec 29, 2014 12:15 pm

What's up guys, I'm new to this forum. But I was wondering if anybody knows or have any s10 crew cab doors they are interested in selling. Preferably a driver side rear door and a driver side front door. Thanks in advance!
dchs51
New Member
New Member
 
Posts: 7
Joined: Sun Dec 28, 2014 11:51 pm
Location: Dothan, Al

Re: Looking for doors

Postby HenryJ » Mon Dec 29, 2014 2:05 pm

Have you tried searching : car-part.com ?

Great resource.

Welcome to the forum :wave:

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12691
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon

Re: Looking for doors

Postby Built2Bend » Mon Dec 29, 2014 6:41 pm

My local junk yard has one I haven't seen it up close I believe it's tan. But am insure of condition. Tho your front doors are the same as any s series. I don't see your location. So I'm not Sher if your close to me or not.
1995 s10 reg cab short bed 4 cyl stick (sold)
1998 s10 reg cab short bed 4 cyl auto
2004 Sonoma crew cab v6 auto
Built2Bend
Crew Elite
Crew Elite
 
Posts: 154
Joined: Thu Nov 27, 2014 9:41 pm
Location: Galion Ohio

Re: Looking for doors

Postby Built2Bend » Mon Dec 29, 2014 6:42 pm

Also welcome.
1995 s10 reg cab short bed 4 cyl stick (sold)
1998 s10 reg cab short bed 4 cyl auto
2004 Sonoma crew cab v6 auto
Built2Bend
Crew Elite
Crew Elite
 
Posts: 154
Joined: Thu Nov 27, 2014 9:41 pm
Location: Galion Ohio

Re: Looking for doors

Postby dchs51 » Mon Dec 29, 2014 6:57 pm

@ HenryJ, no I haven't. I'll try there, thanks. @ Build2Bend, I'm located near Dothan, Alabama.
dchs51
New Member
New Member
 
Posts: 7
Joined: Sun Dec 28, 2014 11:51 pm
Location: Dothan, Al

Re: Looking for doors

Postby HenryJ » Mon Dec 29, 2014 7:38 pm

car-part.com lists yards close to you and by price. Great resource to find used parts. The front doors from a Blazer may be the same as the crew cab? Probably a safer bet to find crew cab doors though.
Are yours a total loss or are the interior panels OK?

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12691
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon

Re: Looking for doors

Postby dchs51 » Mon Dec 29, 2014 11:08 pm

The panels are fine, I just need new doors, I just don't want to pay $600 for doors from the factory.
dchs51
New Member
New Member
 
Posts: 7
Joined: Sun Dec 28, 2014 11:51 pm
Location: Dothan, Al

Re: Looking for doors

Postby HenryJ » Tue Dec 30, 2014 8:03 am

That may make finding a used door easier. Did your glass survive?

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12691
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon

Re: Looking for doors

Postby dchs51 » Tue Dec 30, 2014 8:47 am

Yeah, all of the glass is good. It just looks terrible on the outside. I've been looking around for a few months, and haven't really found anything worth while.
dchs51
New Member
New Member
 
Posts: 7
Joined: Sun Dec 28, 2014 11:51 pm
Location: Dothan, Al

Re: Looking for doors

Postby Built2Bend » Tue Dec 30, 2014 10:37 am

Darn. I was just in Georgia less than an hour from Alabama. But if you could pay for the door and shoping and a little for my time and work I'll send it to you but I don't think it would be worth it. Good luck and car part is a good site I use it a lot.
1995 s10 reg cab short bed 4 cyl stick (sold)
1998 s10 reg cab short bed 4 cyl auto
2004 Sonoma crew cab v6 auto
Built2Bend
Crew Elite
Crew Elite
 
Posts: 154
Joined: Thu Nov 27, 2014 9:41 pm
Location: Galion Ohio

Re: Looking for doors

Postby dchs51 » Tue Dec 30, 2014 10:46 am

Thanks for the effort, much appreciated! I have a 2002 Crew, but I found a 2003 door, that will work won't it?
dchs51
New Member
New Member
 
Posts: 7
Joined: Sun Dec 28, 2014 11:51 pm
Location: Dothan, Al

Re: Looking for doors

Postby Built2Bend » Tue Dec 30, 2014 6:30 pm

Yes all crew cab s10 doors are the same.
1995 s10 reg cab short bed 4 cyl stick (sold)
1998 s10 reg cab short bed 4 cyl auto
2004 Sonoma crew cab v6 auto
Built2Bend
Crew Elite
Crew Elite
 
Posts: 154
Joined: Thu Nov 27, 2014 9:41 pm
Location: Galion Ohio

Postby _STUCKY » Tue Dec 30, 2014 6:46 pm

Does the rear door in question function? I'd suggest that if it does to not just scrap it or throw it away. Rear crew cab doors are far and few between, it may be a better door for someone.
User avatar
_STUCKY
Crew Elite
Crew Elite
 
Posts: 826
Joined: Wed Feb 08, 2012 6:07 pm
Location: Central IL

Re: Looking for doors

Postby dchs51 » Tue Dec 30, 2014 11:12 pm

It functions, but I doubt anybody would want it. It's such an eyesore to have on a vehicle. It's bent out of wack from when I rolled it onto it's side.
dchs51
New Member
New Member
 
Posts: 7
Joined: Sun Dec 28, 2014 11:51 pm
Location: Dothan, Al

Re: Looking for doors

Postby rockinjranch » Wed Dec 31, 2014 9:30 am

welcome to the forum dchs51, I'm just down the road from ya a little piece, in Marianna Florida. good luck on your search
rockinjranch
Regular
Regular
 
Posts: 23
Joined: Thu Oct 23, 2014 12:30 pm
Location: northwest Florida


Return to Classifieds



Who is online

Users browsing this forum: No registered users and 1 guest