Key Fob Programming

The stock systems

Moderator: F9K9

BowtieZR5
Enthusiast
Enthusiast
Posts: 38
Joined: Tue May 04, 2004 1:04 am
Location: Far North Fort Worth (Saginaw), Texas
Contact:

Key Fob Programming

Post by BowtieZR5 »

i couldn't find the post about how to program the key fob. if someone could repost it here i'd preciate it.
User avatar
barch97
Crew K Elite
Crew K Elite
Posts: 1136
Joined: Thu Nov 21, 2002 11:08 am
Location: New Jersey
Contact:

Post by barch97 »

Key fob programming
HenryJ wrote: 1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the door unlock switch.
4. While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
5. Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7. Repeat the previous step to program up to four transmitters.
8. Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter mode.
9. Operate the transmitter functions in order to verify correct system operation.


Easy as pie!
User avatar
HenryJ
Admin K Elite
Admin K Elite
Posts: 12705
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon
Contact:

Post by HenryJ »


"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK