head light

The stock systems

Moderator: F9K9

head light

Postby dozer1530 » Tue Aug 10, 2010 6:20 pm

dose any one know the trick on how to get our head lights in. iv never seen or had the hardest time to get them in right. this is the bigest flow i see in this truck lol so if anny one knows plzz let me know :surrender:
User avatar
dozer1530
Crew Elite
Crew Elite
 
Posts: 152
Joined: Tue Jun 22, 2010 4:53 am
Location: houston / sugarland tx

Re: head light

Postby fallvitals » Tue Aug 10, 2010 6:56 pm

Lol, I know what ya mean. No trick I know of. Just make sure you get em in the slots. Flash light can help you see to guide it in.
fallvitals
Crew K Elite
Crew K Elite
 
Posts: 1132
Joined: Tue Mar 03, 2009 2:34 am
Location: Dunbar, WV

Re: head light

Postby blaz » Tue Aug 10, 2010 8:20 pm

I take the grill off. It makes it so much easier because you can see what you are doing.
blaz
Crew Elite
Crew Elite
 
Posts: 177
Joined: Tue Dec 16, 2008 7:30 pm
Location: Winnipeg, Manitoba, Canada

Re: head light

Postby dozer1530 » Tue Aug 10, 2010 10:59 pm

ill try that. its so stubidly hard to get the two flap things in and the two clips at the same time lol this is rediculus :twisted: :punch:
User avatar
dozer1530
Crew Elite
Crew Elite
 
Posts: 152
Joined: Tue Jun 22, 2010 4:53 am
Location: houston / sugarland tx

Re: head light

Postby Cherokeez71 » Mon May 07, 2012 10:32 am

I just made the holes on the bottom bigger. That seemed to help a lot.
User avatar
Cherokeez71
Regular
Regular
 
Posts: 23
Joined: Sun Mar 11, 2012 8:09 pm
Location: Woodstock, GA

Re: head light

Postby stepasyd » Mon May 07, 2012 3:34 pm

I've also always just taken off the grille, that way, and take the headlight, and put the feet of the headlight assembly into the core support holes first, and then go ahead and push the headlight up towards the core support, and snap the clips onto them..
User avatar
stepasyd
Crew
Crew
 
Posts: 65
Joined: Sun Apr 22, 2012 4:33 am
Location: Laurel Hill, NC

Re: head light

Postby barch97 » Tue May 08, 2012 9:29 am

Image
"Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs."
User avatar
barch97
Crew K Elite
Crew K Elite
 
Posts: 1136
Joined: Thu Nov 21, 2002 11:08 am
Location: New Jersey

Re: head light

Postby ApproachMedium » Wed May 09, 2012 11:03 am

Theres a trick to getting them in. Once you figure it out they pop in simple as pie every time. Even with my bent frame where my passenger side one doesn't go in easy because the front is not straight I can now get it back in 1 2 3. Just have a little patients. Also I found if you have aftermarket headlights sometimes they have unnecessary plastic that can be cut off on the tabs so they will slide in easier. I had to do this to my buddys blazer because I could not get them back in for the life of me.
Knowledge has no value unless its shared with others.
Exploration Machine- 02' CC V8 swap. 300K+
Portable Roller Coaster- 07' MKV VW GTI
Its another Jeep- 98 TJ
ApproachMedium
Crew Elite
Crew Elite
 
Posts: 959
Joined: Tue Nov 17, 2009 1:20 am
Location: Jersey Shore


Return to Stock Electrical / Audio / Lighting



Who is online

Users browsing this forum: No registered users and 1 guest