Window Lift Motor

The stock systems

Moderator: F9K9

Window Lift Motor

Postby MarineGunny » Sat Nov 20, 2010 2:35 pm

I just found this website today while searching for help. Great forum! Wish I'd found it years ago!

I am attempting to replace the window lift motor on my driver side door. I got the old one out and cannot for the life of me get the new one in. I cannot get the rollers to slide in to the rails.

I am at my wits end with this one! Can anyone please give me some advice on how to fix this one???
MarineGunny
New Member
New Member
 
Posts: 1
Joined: Sat Nov 20, 2010 2:25 pm

Re: Window Lift Motor

Postby riceburnr2005 » Sat Nov 20, 2010 9:21 pm

do you have a haynes manual?
U.S. Marines
2003 CC LS, indigo blue, Spectre Cold Air, OBX throttle body spacer, descreened MAF, hunter bull bar, BAJA off road lights, 15x7 Crager soft 8 wheels, 31x10.50x15 Goodyear Wrangler Authority tires, cranked TB's, Daystar 2 inch shackles, 2" PA body lift, 1.5 inch spacers in the rear, Access TonnoSport Tonneau cover, reese hitch, carbon fiber front chevy badge, Lund bug deflector, roof rack from a blazer, Kenwood CD player, JVC 6 1/2 speakers.
User avatar
riceburnr2005
Crew Elite
Crew Elite
 
Posts: 179
Joined: Wed Sep 29, 2010 9:02 pm
Location: MCAS Cherry Point, NC

Re: Window Lift Motor

Postby HenryJ » Sat Nov 20, 2010 9:35 pm

GMdata wrote:Motor Replacement - Power Window
Removal Procedure

Caution

Do not attempt to service the regulator motor without releasing the counterbalance spring tension. The regulator lift arm is under tension from the counterbalance spring and can cause personal injury if the motor is removed from the regulator.

1. Remove the window regulator.
2. Drill a hole through the window regulator and the sector gear.
3. Install a bolt and a nut through the hole in order to lock the sector gear in position.
4. Drill out the rivets that secure the power window motor to the window regulator.
5. Remove the power window motor from the window regulator.

Installation Procedure

1. Install the power window motor to the window regulator.

Important
Remove the nut and the bolt that were used in order to secure the sector gear in position.
2. Install the rivets in order to secure the power window motor to the window regulator.
3. Install the window regulator.

Window Regulator Replacement - Front Door
Tools Required

J 34940 Rivet Gun
Removal Procedure



1. Remove the window.
2. Disconnect the power window motor electrical connector, if equipped.
3. Remove the electrical harness retainers, if equipped.
4. Drill out the rivets that secure the window regulator to the door.
5. Remove the window regulator from the door.
6. Remove the power window motor, if equipped.

Installation Procedure

1. Install the power window motor, if equipped.
2. Install the window regulator to the door.
3. Install the rivets that secure the window regulator to the door using J 34940 .
4. Connect the electrical connector, if equipped.
5. Connect the electrical harness retainers, if equipped.
6. Install the window.
Sure seems easy. I have not done it on an s-series. Wish I could be of more help.

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12693
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon

Re: Window Lift Motor

Postby riceburnr2005 » Sat Nov 20, 2010 9:46 pm

haha, well there you go..
U.S. Marines
2003 CC LS, indigo blue, Spectre Cold Air, OBX throttle body spacer, descreened MAF, hunter bull bar, BAJA off road lights, 15x7 Crager soft 8 wheels, 31x10.50x15 Goodyear Wrangler Authority tires, cranked TB's, Daystar 2 inch shackles, 2" PA body lift, 1.5 inch spacers in the rear, Access TonnoSport Tonneau cover, reese hitch, carbon fiber front chevy badge, Lund bug deflector, roof rack from a blazer, Kenwood CD player, JVC 6 1/2 speakers.
User avatar
riceburnr2005
Crew Elite
Crew Elite
 
Posts: 179
Joined: Wed Sep 29, 2010 9:02 pm
Location: MCAS Cherry Point, NC

Re: Window Lift Motor

Postby F9K9 » Sun Nov 21, 2010 6:15 pm

Gunny, let me know if you still have problems. HenryJ provided the instructions but, I might be able to help with additional questions for a jarhead.
"For those who have fought for it, FREEDOM has a taste that the protected will never know."
GUIDE TO SEARCHING. (Some of the forum software is different but, it has helped me a lot.)

"Those who don't know history are destined to repeat it." Edmund Burke
User avatar
F9K9
Mod K Elite
Mod K Elite
 
Posts: 6179
Joined: Sun May 30, 2004 12:26 pm
Location: London, Kentucky, United States


Return to Stock Electrical / Audio / Lighting



Who is online

Users browsing this forum: No registered users and 2 guests