how to remove starter?

The stock systems

Moderator: F9K9

kenfyoozed
Enthusiast
Enthusiast
Posts: 30
Joined: Thu May 06, 2010 6:36 am
Location: Mobile, Al

how to remove starter?

Post by kenfyoozed »

OK please dont flame me for asking yet another starter removal question. Ive search but havent found what i need.

I have removed the wires and the bolts, yet i can not get it to come out. Just not enough room, i loosened the rear tranny bolts, and i think i removed the front engine mount through bolt. Its right behind the shock tower if your looking at the engine from the passenger side.

1.) IS this the right bolt to remove?

2) how far do i jack it up or should i be lowering?

3) how the heck do i get it out.

Ive spent about 4hrs trying to wiggle it out. no luck. Please help. Im so close yet so far away.
kenfyoozed
Enthusiast
Enthusiast
Posts: 30
Joined: Thu May 06, 2010 6:36 am
Location: Mobile, Al

Re: how to remove starter?

Post by kenfyoozed »

Thanks. I finally got it out. There was , what i call an alignment plate that aligns the starter with the fly wheel. it was held on by 2 10mm bolts. once that was off the starter almost fell out. Just needed more light to see what was in there.