Replaced Wheel hub assy. ABS now on

Modified and aftermarket systems, lights, wiring, etc.

Moderator: F9K9

Replaced Wheel hub assy. ABS now on

Postby davitg » Sun Jan 08, 2012 6:36 am

Hi All,

I am assuming the sensor on the new hub is bad. I see the sensors sold separately, how do I change the sensor? The one on the old hub is fine and would like to swap it out. I really don't want to change the hub again.

It has one allen screw, and what looks like a rivet. Is the rivet just a pin?

2003 ZR5

Dave G
2003 ZR5 Quad cab 4X4
User avatar
davitg
New Member
New Member
 
Posts: 1
Joined: Sun Jan 08, 2012 6:26 am
Location: Rhode Island

Re: Replaced Wheel hub assy. ABS now on

Postby F9K9 » Sun Jan 08, 2012 8:18 am

From the FSM and not much help.

Remove wheel speed sensor mounting clip on the control arm.
Remove wheel speed sensor mounting clip on the frame rail.
Disconnect the wheel speed sensor electrical connector (2).
Remove the sensor mounting screw (5).


Let me know if you can see the image. I doubt that this will work.

Image
"For those who have fought for it, FREEDOM has a taste that the protected will never know."
GUIDE TO SEARCHING. (Some of the forum software is different but, it has helped me a lot.)

"Those who don't know history are destined to repeat it." Edmund Burke
User avatar
F9K9
Mod K Elite
Mod K Elite
 
Posts: 6179
Joined: Sun May 30, 2004 12:26 pm
Location: London, Kentucky, United States

Re: Replaced Wheel hub assy. ABS now on

Postby HenryJ » Sun Jan 08, 2012 8:37 am

davitg wrote:...It has one allen screw, and what looks like a rivet. Is the rivet just a pin?
Welcome Dave :wave:
You have it right. Remove the allen bolt and that is all that attaches it to the hub assembly. The pin is a locator to correctly orient the sensor. There is an o-ring that seals it and the sensor extends down in there nearly and inch. Well, probably less than that , but you know how fish stories go ;)
Easy swap. Sort of a pain to get out as it is in there deep enough that the dust shield for the brakes gets in the way , IIRC?

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12690
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon

Re: Replaced Wheel hub assy. ABS now on

Postby F9K9 » Sun Jan 08, 2012 8:57 am

Did that image show up, Brule?
"For those who have fought for it, FREEDOM has a taste that the protected will never know."
GUIDE TO SEARCHING. (Some of the forum software is different but, it has helped me a lot.)

"Those who don't know history are destined to repeat it." Edmund Burke
User avatar
F9K9
Mod K Elite
Mod K Elite
 
Posts: 6179
Joined: Sun May 30, 2004 12:26 pm
Location: London, Kentucky, United States

Re: Replaced Wheel hub assy. ABS now on

Postby HenryJ » Sun Jan 08, 2012 9:25 am

Nope. :(

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12690
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon

Re: Replaced Wheel hub assy. ABS now on

Postby F9K9 » Sun Jan 08, 2012 1:44 pm

:oops: I figured.
"For those who have fought for it, FREEDOM has a taste that the protected will never know."
GUIDE TO SEARCHING. (Some of the forum software is different but, it has helped me a lot.)

"Those who don't know history are destined to repeat it." Edmund Burke
User avatar
F9K9
Mod K Elite
Mod K Elite
 
Posts: 6179
Joined: Sun May 30, 2004 12:26 pm
Location: London, Kentucky, United States

Re: Replaced Wheel hub assy. ABS now on

Postby HenryJ » Sun Jan 08, 2012 1:48 pm

F9K9 wrote:... I figured.
Yep. Looks like it is ported from a sever. Not accessible directly from the internet.

"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
- ThunderII KE7CSK
User avatar
HenryJ
Admin K Elite
Admin K Elite
 
Posts: 12690
Joined: Tue Oct 01, 2002 9:14 pm
Location: Ontario, Oregon


Return to Electrical Modifications / Audio / Video / Lighting



Who is online

Users browsing this forum: No registered users and 1 guest