Page 1 of 1

MML picture thread

Posted: Wed Oct 03, 2012 7:58 am
by _STUCKY
**Constantly Under Construction As I Read And Learn More**

**Do any of these trucks have "build threads" that I can't find?**

**Please add more pictures**
____________________________________________________________________________________
MML thread: http://forums.s-10crewcab.net/viewtopic.php?f=15&t=3551
HenryJ wrote:

Here is what you need:
Performance Accessories PA192 2" body lift $209 Summit
Bilstein heavy duty shock absorbers $240 ORW
Torsion Bar adjustment and subsequent alignment $50
Boise SpringWorks Kit $190 Boise SpringWorks
Front 1.25" and rear 3" spacers $170 Ebay- Completevalue
Front replacement bump stops - GM PART # 15712438 $23 (new). These are off of the rear of late '90s and early 2000 Chevrolet fullsize pickups and can be purchased used for under $5
Skidz Cut-out Flares $375 (no longer available, however the cuts can still be made and paint or liner applied)
BFGoodrich All Terrain T/A KO 33x9.50-15 tires $560 4Wheelparts or Summit
Mount and balance $50

Grand total = $1697
**prices have gone up on some things**prices good as of 10/5/12**
____________________________________________________________________________________

Parts:

Bilstein shocks
Front part number 24-014106 $66.33
http://www.shockwarehouse.com/site/prod ... ries-Truck
Extended length: ~16 inches
Collapsed length: ~11 inches
Image

Rear part number 24-016810 $66.33
http://www.shockwarehouse.com/site/prod ... ries-Truck
Extended length: ~23.5 inches
Collapsed length: ~16 inches
Image

Boise Springworks S10 kit $230
Phone: 208-377-1157
http://www.boisespringworks.com/
Kit includes 6 springs, 4 u bolts with nuts and washers, and 2 3/8" center bolts with nuts
Long leaf length: 25 inches (13/12 with short side forward)
Middle leaf length: 19 inches (10/9 with short side forward)
Short leaf length: 12 inches (6/6 centered pin)
Image

Energy Suspension Polyurathane Sway Bar Bushings part number 35207G $31.95
http://shop.synergyoffroad.com/Energy-S ... 35207G.htm

Performance Accessories 2 inch Body Lift part number PA-192 $233.95
http://shop.synergyoffroad.com/2-Body-L ... PRF192.htm

____________________________________________________________________________________

Tech:

Torsion bar adjustment: http://www.s-10crewcab.net/og1/modinfo/ ... ionbar.htm

http://www.s10forum.com/forum/f220/how- ... ft-439391/

Boise Springworks Kit: http://www.s-10crewcab.net/HenryJ/spring.html

Body lift: http://www.s-10crewcab.net/og1/modinfo/ ... dyLift.htm

Fender Cuts: http://www.s-10crewcab.net/og1/modinfo/ ... kidz1.html

viewtopic.php?f=3&t=7589

Tires and Wheels: https://www.rsracing.com/tech-wheel.html#backspace

http://forums.s-10crewcab.net/viewtopic.php?f=15&t=4670

Bump stops: http://www.s-10crewcab.net/forums/viewt ... 64&p=76316
Image

Skid plates: viewtopic.php?f=3&t=6547
Image

Polyurethane Sway Bar Bushings: http://www.s-10crewcab.net/forums/viewt ... =15&t=3864
Image

Sway Bar Disconnects: http://www.s-10crewcab.net/forums/viewt ... f=15&t=452
Image
Connected:
Image
Disconnected:
Image

Replacement front end part numbers:

Poly control arm bushings:
Upper: Moog part # K6418
Lower: Energy Suspension part # 3.3167g

Ball joints:
Upper: Moog part # K5320
Lower: Moog part # K5335

Tie rods:
Inner: Moog part # ES3584
Outer: Moog part # ES3462
Tie rod adjusting sleeve: Moog part # ES2004S

Idler arm: Moog part # K6251T
Pitman arm: Moog part # K6255

____________________________________________________________________________________

Stock 04 Crew Cab S10:

Image

____________________________________________________________________________________

HenryJ: http://www.s-10crewcab.net/HenryJ/thunder2.html

Image

____________________________________________________________________________________

F9K9:

Image

Image
____________________________________________________________________________________

Fallvitals: http://forums.s-10crewcab.net/viewtopic.php?f=15&t=7448

Image
____________________________________________________________________________________

Kermit: http://www.gminsidenews.com/forums/f48/ ... 4x4-42763/

Image
____________________________________________________________________________________

Ludwis:

Image
____________________________________________________________________________________

Blaz: http://www.expeditionportal.com/forum/t ... light=blaz

Image
____________________________________________________________________________________

Jedthrocornpone:

Image

Image
____________________________________________________________________________________

Jongo88:

Image
____________________________________________________________________________________

Kpietrowski:

Image
____________________________________________________________________________________

okie s10:

Image
____________________________________________________________________________________

DeiselRed:

Image

Image

Re: MML picture thread

Posted: Thu Oct 04, 2012 5:44 pm
by F9K9
To be honest with you, this was my first forum......period. I didn't think of a build thread, until I was finished (actually just paused for now), and began building other rigs. I don't believe that I even have stock photos of my rig. I could probably assemble some pics in various stages if, anyone is interested.

Great start for a thread though. You put some thought and effort into it. Good job!! :thumb:

Re: MML picture thread

Posted: Thu Oct 04, 2012 9:23 pm
by blaz
here is a link to my build thread. I never put one on here because it is a blazer and not a crew. I do frequent this site though, it is one of the most helpful/friendly in existence. :clap:

http://www.expeditionportal.com/forum/t ... light=blaz

Re: MML picture thread

Posted: Fri Oct 05, 2012 5:41 am
by HenryJ
blaz wrote:here is a link to my build thread. I never put one on here because it is a blazer and not a crew. ...
While the focus is s-series crew cab, everyone is welcome. Blazers are a very close cousin :thumb:

Re: MML picture thread

Posted: Fri Oct 05, 2012 7:50 am
by _STUCKY
I could probably assemble some pics in various stages if, anyone is interested.
This guy is interested! :mrgreen:

Re: MML picture thread

Posted: Fri Oct 05, 2012 4:07 pm
by F9K9
_STUCKY wrote:......This guy is interested! :mrgreen:
I'll see what I can come up with.

Re: MML picture thread

Posted: Thu Oct 11, 2012 6:23 pm
by _STUCKY
Bump for newly added information. :mrgreen:

Still Under construction

Re: MML picture thread

Posted: Thu Oct 11, 2012 7:06 pm
by F9K9
Bump duly noted.

Re: MML picture thread

Posted: Wed Oct 31, 2012 7:39 am
by _STUCKY
Bump for more pretty pictures!

Should I include trucks that haven't cut the fenders? There's a couple good looking trucks that I'm not sure if the fenders are trimmed or not, but have pretty much everything else, including meaty rubber.

Re: MML picture thread

Posted: Wed Oct 31, 2012 5:28 pm
by HenryJ
Image

Re: MML picture thread

Posted: Wed Oct 31, 2012 5:29 pm
by HenryJ
_STUCKY wrote:Should I include trucks that haven't cut the fenders? There's a couple good looking trucks that I'm not sure if the fenders are trimmed or not, but have pretty much everything else, including meaty rubber.
Sure , but I would rename the thread so that others do not assume all the rigs have the MML.

Re: MML picture thread

Posted: Thu Feb 14, 2013 12:55 am
by _STUCKY
Bump!

Re: MML picture thread

Posted: Mon Dec 09, 2013 12:35 am
by _STUCKY
Bump

:wave:

Re: MML picture thread

Posted: Tue Dec 10, 2013 12:18 pm
by crewcabs10
Bump! :D

Image

What are we bumping?

Re: MML picture thread

Posted: Wed Dec 11, 2013 5:46 pm
by _STUCKY
Wow! That truck looks great! Please post what all you used since there are a few different ways to go about it (example: springs vs. shackles)

Re: MML picture thread

Posted: Thu Dec 12, 2013 12:20 pm
by crewcabs10
Thanks!
She has seen mud twice, and won't again til the 6" SL and 35's are on.

04 Zr5 Bought stock in June w/68k
2" PA Body Lift (192)
1.5" Crank
1.5" Ebay AAL :roll:
Front fender/bumper trimming (Blends almost perfect you'd never know if i didn't tell you)
1.5" Front spacers, 3" Rear
33 12.5 15 BFG A/T's

Re: MML picture thread

Posted: Sun Feb 18, 2018 8:13 pm
by southernzr5
Is there any way of getting these pics to show?

Posted: Mon Feb 19, 2018 6:20 am
by _STUCKY
Photobucket killed all the links. I never started a new account on the other hosting sites. I still have them all on photobucket though.

Re: MML picture thread

Posted: Mon Feb 19, 2018 4:00 pm
by southernzr5
If any of the MML guys are still lurking around this site, post up new pics!! :D